The ZJE - Ⅱ special pump is an impurity pump with special performance. In recent years, it has been called the "special feeding and pressurizing pump for filter presses". This pump sucks in slurry from the rear side. It has a simple packing seal without leakage. More importantly, its flow - head curve is very steep, which is very suitable for some special working conditions.

Features of the Feed Pump for Filter Press

The main technical parameters listed in this document are the data of the pump at 1480 r/min. For working conditions with low - pressure requirements, the problem can be solved by appropriately cutting the impeller or reducing the pump speed. You can also choose the ZJ series slurry pumps produced by our factory. The mechanical seal of the ZJ pump is also "leak - free", just like that of the ZJE - Ⅱ pump. This document only provides the foundation dimensions for direct - drive transmissions. If the foundation dimensions for belt - drive transmissions are required due to terrain limitations or the need to change the pump speed, specific data should be provided on - site for separate design. Belt - drive methods generally include tail - frame drive, parallel drive, and back - support drive.

Scope of Application of the Feed Pump for Filter Press

• Innovative design: It has a novel hydraulic and structural design, with high efficiency, corrosion resistance, and stable and reliable operation.

• Early - stage feeding: It can provide a large flow rate and low pressure during the early - stage feeding process.

• Later - stage pressing: It can offer a small flow rate and high pressure during the later - stage pressing process.

• Shaft seal: The shaft seal is simple and reliable, requiring no water injection, no mechanical seal, and being leak - free.

• Feeding for filter press: It does not require variable - frequency speed regulation for filter - press feeding and can transport high - concentration materials.

Due to the large number of product parameters, our company only provides some of them. If you need more detailed information, please contact our technician at 182-3296-2233.